How to use baking soda for rug cleaning

 

Description :

Professional rug cleaners have their own set of tools and techniques to clean rugs using baking soda. Learn about them here!

Rugs, whether they are wall-to-wall or just a few area rugs, take a beating over time. You walk on them every day, spill on them, and don’t vacuum them nearly as often as you should. Rugs are also more transparent than other surfaces in your home, such as walls or floors. They’re formed of fibers and have a lot of holes and corners between the weaves or piles, making them perfect for absorbing aromas.

Furthermore, the smoke has a strong odor – either it’s a habit, or you’ve burned something in the oven, or you’ve had a fire (as we recently experienced when our fireplace suddenly malfunctioned!). Another example is pets.

You can spot-clean a rug for stains or steam-clean it for disinfection, but if your rug is overall in good health but has a persistent stench in the room, you should deodorize it. And, luckily, you could already have the tool you require in your cupboard!

Why Should You Clean Your Rug With Baking Soda?

Baking soda is a proven odor absorber that is also inexpensive and natural. “Baking soda’s particles sink deep into the rug, almost to the point where you can’t see them, to absorb and neutralize scents,” the manufacturer claims.

Another benefit of baking soda is that it deodorizes. Because it’s a dry deodorizer rather than a spray, you needn’t be concerned about over-saturating your rug (or other upholstery) and risking stains, mold development, or bacteria growth if it doesn’t fully dry before it can be used again. Deodorizing with baking soda is also a breeze. This is how you do it.

How to Use Baking Soda to Deodorize Your rug

What You’ll Require

baking soda (one box)

Vacuum

Instructions

Rearrange your furniture: 

Remove any furniture from the rug to gain access to the entire surface area. You should vacuum the rug to remove dirt, pet fur, and trash. (Do not use this time to spot-clean the rug; you want it to be dry for the next step.)

Mix in the baking soda as follows:

 Apply baking soda liberally to the rug straight from the package or through a fine-mesh screen. If you have a deep-pile rug, sprinkle tiny amounts of baking soda and rub it in with your fingertips before moving on to the next section.

Let it absorb:

Bake the baking soda for several hours or overnight to absorb the scent.

Vacuum: Remove the baking soda by vacuuming it.

Replace your furniture: Replace everything in its proper spot and you’re done!

Getting Rid of Non-Greasy Stains :

Take the non-greasy stain, for example. These are stains that do not have a residue underneath them. To make these, simply follow these steps:

  1. Cover it with a heavy sprinkle of baking soda.

 

  1. Mist the stain lightly with hot water.

 

  1. Ideally, you will want to let the mixture sit on the stain for at least three hours, but longer if possible. Let it sit on the stain for at least three hours at night, but if possible, longer.

 

  1. When you are ready, all you need to do is vacuum the area, and the stain should disappear. Your rug will look much fresher. The procedure can be repeated several times if necessary.

Cleaning Non-Greasy Stains:

There is no underlying residue in non-greasy stains. To get rid of them, simply follow these steps:

  • Using a substantial amount of baking soda, cover the discoloration completely.

 

  • Lightly sprinkle the stain with hot water (you’ll need a spray bottle for this).

 

  • Allow the mixture to sit for a minimum of three hours, but longer if feasible, while keeping the area wet. This could be something you do before going to bed or before going to work.

 

  • Leaving a damp towel on top of the stain will help keep it damp, reducing the need to mist it.

 

  • After letting the stain sit for a while, all you must do is vacuum the area and the stain should be gone. If you can still see any of the stains, repeat the process as necessary.

 

Cleaning Up Greasy Stains :

Not all stains will be easy to remove. If the stain contains grease, you’ll need to take a different strategy to get it out. Try the following four steps:

 

  • To begin, wipe the stain with a rag or paper towel to remove as much grease as possible. If you rub the oil, it will set on the rug and destroy the fibers.

 

  • Sprinkle dry baking soda on the stain after you’ve wiped it thoroughly and let it sit overnight. Allowing it to sit for longer periods will help it to absorb more grease.

 

  • You should vacuum the area completely in the morning. You’re done when you can’t see the stain any longer. If the stain is still visible, wipe it with a small amount of dish soap (about the size of a cent at first) to help cut through the grease.

 

  • Start wiping up the soapy residue with water and a cloth right away. Always remember to blot the grease to avoid spreading it or damaging the rug fibers.

 

  • Finally, blot the area with a paper towel until it is slightly damp.

 

  • Vacuum the area again after adding another layer of baking soda to the stain and allowing it to sit for at least three hours.

 

 

You May Also Like

Contact_ Us

We're Here To Help contact us

Call Us Now